Login for pricing
Out of stock
ProLiant DL385 Gen11 9115 2.6GHz 16c 1P 2x32GB-R 8LFF NS204i-u NC BCM57416 2x1000W PS EU Server
Category: Servers
HPE ProLiant DL385 Gen11 9115 2.6GHz 16c 1P 2x32GB-R 8LFF NS204i-u NC BCM57416 2x1000W PS EU Server
SKU
P81841-425
| SKU | P81841-425 |
|---|---|
| EAN | 0190017795737 |
| Manufacturer | HPE |
| Availability | Out of Stock |
| Product Family | ProLiant |
| Product Series | DL |
Intuitive Cloud Operating Experience: Simple, Self-service, and Automated
HPE ProLiant DL385 Gen11 servers are engineered for your hybrid world. The HPE ProLiant Gen11 servers simplify the way you control your business’s compute—from edge to cloud—with a cloud operating experience.
Transform business operations and pivot your team from reactive to proactive with global visibility and insight through a self-service console.
Automate tasks for efficiency in deployment and instant scalability for seamless, simplified support and lifecycle management, reducing tasks and shortening maintenance windows.
These experiences are engineered and built into all HPE ProLiant Gen11 servers, whether purchased as physical servers or consumed as-a-service using GreenLake Flex Solutions as your compute and storage demands grow.
Simplify and secure server management from edge to cloud with HPE Compute Ops Management. HPE Compute Ops Management is an as-a-service compute management experience that delivers greater simplicity, agility, and speed across your entire compute landscape, globally.
Trusted Security by Design: Uncompromising, Fundamental, and Protected
The HPE ProLiant DL385 Gen11 server is tied into the silicon root of trust and the AMD Secure Processor, a dedicated security processor embedded in the AMD EPYC™ system on a chip (SoC), to manage secure boot, memory encryption, and secure virtualization.
HPE ProLiant Gen11 servers use the silicon root of trust to anchor the firmware of an HPE ASIC, creating an immutable fingerprint for the AMD Secure Processor that must be matched exactly before the server will boot. This verifies that malicious code is contained, and healthy servers are protected.
HPE ProLiant Gen11 servers continuously protect healthy servers at the edge by providing rapid detection of security-compromised servers, even to the point of not allowing them to boot if it identifies and contains malicious code, with IDevID certificates installed by default.
HPE ProLiant Gen11 servers provide automated recovery from a security event, including restoration of validated firmware, and facilitating recovery of the operating system, application, data connections, and providing a fast path to bring a server back online and into normal operations.
From silicon to software, from factory to cloud, and from generation to generation, HPE ProLiant Gen11 is engineered with a fundamental security approach to defend against increasingly complex threats through an uncompromising commitment to constant security advancements that are built into our DNA.
Are you looking for an accelerator-optimized performance solution to run your AI or Big Data analytics workloads? The HPE ProLiant DL385 Gen11 server is a 2U 2P solution that delivers exceptional compute performance, upgraded high-speed data transfer rate and memory depth at 2P compute capability. Powered by 4th & 5th Generation AMD EPYC™ 9004 & 9005 Series Processors with up to 160 cores, increased memory bandwidth and capacity, high-speed PCIe Gen5 I/O, enhanced GPU support, and EDSFF storage, the HPE ProLiant DL385 Gen11 server is a superb accelerator-optimized 2U 2P solution. Enhanced security features with the silicon root of trust from HPE are built into the firmware, creating a digital fingerprint for the AMD Secure Processor to validate safe operation prior to boot. HPE ProLiant DL385 Gen11 server is an excellent choice for compute and data storage demanding workloads requiring increased core count, and storage and I/O scalability.
What is new supporting point:
Powered by the 4th & 5th Generation AMD EPYC™ 9004 & 9005 Series Processors with 5nm technology that supports up to 160 cores at 400W, 1152 MB L3 Cache, and 24 DIMMs for DDR5 memory up to 6400 MT/s.
12 DIMM channels per processor for up to 6 TB total DDR5 memory with increased memory bandwidth and performance, and lower power requirements.
Advanced data transfer rates and higher network speeds from the PCIe Gen5 serial expansion bus, with up to 2x 16 PCIe Gen5 and two OCP slots.
Includes HPE Integrated Lights-Out 6 (iLO 6) server management software that enables you to securely configure, monitor, and update your HPE ProLiant Gen11 servers seamlessly from anywhere.
Supports hot-pluggable, high-availability RAID M.2 boot options.
PCIe Gen5 EDSFF support and up to 8x single-wide and 4x double-wide GPU support.
What is new supporting point:
Powered by the 4th & 5th Generation AMD EPYC™ 9004 & 9005 Series Processors with 5nm technology that supports up to 160 cores at 400W, 1152 MB L3 Cache, and 24 DIMMs for DDR5 memory up to 6400 MT/s.
12 DIMM channels per processor for up to 6 TB total DDR5 memory with increased memory bandwidth and performance, and lower power requirements.
Advanced data transfer rates and higher network speeds from the PCIe Gen5 serial expansion bus, with up to 2x 16 PCIe Gen5 and two OCP slots.
Includes HPE Integrated Lights-Out 6 (iLO 6) server management software that enables you to securely configure, monitor, and update your HPE ProLiant Gen11 servers seamlessly from anywhere.
Supports hot-pluggable, high-availability RAID M.2 boot options.
PCIe Gen5 EDSFF support and up to 8x single-wide and 4x double-wide GPU support.
| Processor | |
|---|---|
| Processor generation | AMD EPYC™ 9005 Series |
| Processor cache type | L3 |
| Processor cache | 64 MB |
| Processor frequency | 2.6 GHz |
| Processor boost frequency | 4.1 GHz |
| Number of processors installed | 1 |
| Processor model | 9115 |
| Processor cores | 16 |
| Processor manufacturer | AMD |
| Processor family | AMD EPYC |
| Memory | |
| Internal memory | 64 GB |
| Memory layout (slots x size) | 2 x 32 GB |
| Memory slots | 24x DIMM |
| Memory clock speed | 6400 MHz |
| Maximum internal memory | 6 TB |
| Internal memory type | DDR5-SDRAM |
| Storage | |
| Supported RAID controllers | HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device |
| Supported HDD sizes | 3.5" |
| RAID support | Yes |
| Optical drive type | No |
| Number of HDDs supported | 8 |
| Storage drive type | None ship standard, 8 LFF supported |
| Network | |
| LAN controller | Broadcom BCM57416 |
| Ethernet LAN | Yes |
| Ethernet interface type | 10 Gigabit Ethernet |
| Ports & interfaces | |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 3 |
| VGA (D-Sub) ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 2 |
| Expansion slots | 8 maximum, for detailed descriptions refer to the QuickSpecs |
| Number of management ports | 1 pc(s) |
| Optical drive | |
| Optical drive type | No |
| Design | |
| Rack mounting | Yes |
| Optical drive type | No |
| Chassis type | Rack (2U) |
| Product colour | Black |
| Cooling type | Active |
| Performance | |
|---|---|
| Security features | For full security features refer to the QuickSpecs |
| Operating system installed | No |
| Management platform | HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires download); HPE iLO Advanced, HPE iLO Advanced Premium Security Edition, HPE OneView Advanced (require licenses) and HPE Compute Ops Management (optional subscription available) Refer to the iLO 6 User Guide |
| Software | |
| Operating system installed | No |
| Power | |
| Number of main power supplies | 2 |
| Power supply type | 2x HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit |
| Redundant power supply (RPS) support | Yes |
| Power supply | 1000 W |
| Weight & dimensions | |
| Dimensions (W x D x H) (imperial) | 599.9 x 917.7 x 270 mm (23.6 x 36.1 x 10.6") |
| Width | 663.8 mm |
| Weight | 42.8 kg |
| Height | 270 mm |
| Depth | 917.7 mm |
| Management features | |
| Management platform | HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires download); HPE iLO Advanced, HPE iLO Advanced Premium Security Edition, HPE OneView Advanced (require licenses) and HPE Compute Ops Management (optional subscription available) Refer to the iLO 6 User Guide |
| Technical details | |
| Supported HDD sizes | 3.5" |
| Security features | For full security features refer to the QuickSpecs |
| Rack mounting | Yes |
| Number of processors supported | 1 |
| Ethernet interface type | 10 Gigabit Ethernet |
| Chassis type | Rack (2U) |
| Weight (imperial) | 42.8 kg (94.4 lbs) |
| Standard fans | 6x Performance Fans |
| Other features | |
| Security features | For full security features refer to the QuickSpecs |
| Number of processors supported | 1 |
| Weight (imperial) | 42.8 kg (94.4 lbs) |
| Standard fans | 6x Performance Fans |
| Storage drive type | None ship standard, 8 LFF supported |
| Dimensions (W x D x H) (imperial) | 599.9 x 917.7 x 270 mm (23.6 x 36.1 x 10.6") |
You may also be interested in
| Product |
HPE ProLiant DL385 Gen11 9115 2.6GHz 1...
Login for pricing
|
Recommended
HPE ProLiant DL380 Gen11 6530 2.1GHz 3...
Login for pricing
|
New
HPE ProLiant Compute DL380 Gen12 6505P...
Login for pricing
|
HPE ProLiant Compute DL320 Gen12 6505P...
Login for pricing
|
Hot Product
HPE ProLiant Compute ML350 Gen12 6505P...
Login for pricing
|
Bestseller
HPE ProLiant DL385 Gen11 9124 3.0GHz 1...
Login for pricing
|
|---|---|---|---|---|---|---|
| SKU |
P81841-425
|
P81787-425
|
P89962-425
|
P87783-425
|
P87787-425
|
P77245-425
|
| Manufacturer |
HPE
|
HPE
|
HPE
|
HPE
|
HPE
|
HPE
|
| Internal memory type |
DDR5-SDRAM
|
DDR5-SDRAM
|
DDR5-SDRAM
|
DDR5-SDRAM
|
DDR5-SDRAM
|
DDR5-SDRAM
|
| Chassis type |
Rack (2U)
|
Rack (2U)
|
Rack (2U)
|
Rack (1U)
|
Tower (4U)
|
Rack (2U)
|
| Processor family |
AMD EPYC
|
Intel Xeon Gold
|
Intel Xeon
|
Intel Xeon
|
Intel Xeon
|
AMD EPYC
|
| Redundant power supply (RPS) support |
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
| Internal memory |
64GB
|
64GB
|
64GB
|
64GB
|
64GB
|
64GB
|